Cushman Wakefield Project

Posted in Uncategorized on April 3, 2018 by Chuck

This was a big one.

Jeff at Cushman Wakefield contacted me with a request to build some tables to finish out their break room at their office in downtown SLC. The request was simple enough; It couldn’t look like it came from Crate and Barrel.

Ok.

There wasn’t too much back and forth on design with this one. Jeff emailed me a few pics, I emailed him a design that I came up with, he said go with it.

Ok. (we’re rockin’ already!)

Due to the number of pieces in this project and the fact that I dont have a ton of space to build and store stuff, I had to get the tables done, load them in the trailer and then start on the benches. I normally like to kinda build stuff like this in unison because I like to pair them together during fabrication and have a looky-look how they mesh and maybe change or adjust they design if need be. I didn’t have that luxury with this build tho.

Given the design of the tables, and the fact that the benches needed to be able to slide completely under the tables, I had to get creative with the design of the benches to accommodate the trestle. I had a few ideas of what I was gonna do but in the end, but given the fact that the tables were already in the trailer nested on top of each other, I wasn’t able to play around with the design after seeing them paired up… so I just went with it. I think everything turned out pretty rad too.

Thank you so much to Jeff and the rest of the gang at Cushman Wakefield for commissioning this project. And an extra thanks to Jeff for taking time out of his day to muscle the tables and benches into the freight elevator with me! (last pic of everything loaded into a 12×6 trailer!)

HDjUI30%T8O3COtMlTub+Q79QiWddlRx2df7a5Aplf+QLgYxQHHVRp6%FLC9q+l4qgIXTDj6gTRHek%cwR1QQN5Qfullsizeoutput_13600NXkEdVpSl2C+TSVS5LfKwfullsizeoutput_135fmIU%i0MOSR+cpliJzK7b0gPH6dnAWMQUeAxCjFE4Grvg

 

Advertisements

Kelly’s Bench

Posted in Uncategorized on March 25, 2018 by Chuck

How cool did this turn out! Not gonna lie…kinda blew me up a little bit. Its hard enough to weld two things EXACTLY the same, but these bases aren’t welded..they’re BENT! And there’s THREE of them! You wanna talk about measure twice and cut once, this was more like measure ten times and bend, then tweak, then cold-set a little bit…but guess what? They are EXACTLY the same! And if you’re asking yourself why Im making such a big deal about this, its because they all have to sit level on the floor so the bench isn’t all wonky.

And it isn’t.

Kelly is a loyal client whose house has more of my stuff in it than my own house does. Let me tell you…its very flattering to go to her house and see all of the stuff Ive built for her over the years.

So thank you (again), Kelly!

Cliff and Stanna’s Table

Posted in Uncategorized on November 30, 2017 by Chuck

Cliff and Stanna live here in Park City. They built an incredible house in an incredible location and thus, needed an incredible dining table…duh!

This is another one that took a LOOOOONG time to deliver. I remember talking to Stanna in August when she asked, “how long until its delivered?” I said, “Well, it won’t be two weeks but it definitely won’t be Thanksgiving either”

So, a couple days before Thanksgiving Stanna finally gets here table.

In my defense tho, the solid surface guy was the hangup…god knows I never procrastinate…ever! Yeah right!

Anyway, lets get to the table. I mean look at this thing! A Walnut base with a solid surface top called Neolith that is supposedly diamond tough. I edge banded (twice) with Walnut to build up a nice, durable edge and then finished off with two 20″ Walnut leafs, or leaves (both correct if you’re wondering).

At 65 inches in diameter, it spreads apart to over 100 inches to accommodate larger dinner parties, or possibly an aircraft landing. Its big.

Hands down the most intricate, up at night thinking about how Im gonna build it, detailed piece I’ve done to date.

Merci Cliff and Stanna!

(will hopefully update with better pics at some point…and pay no attention to it being wet, it spent the night in my trailer for an early delivery and started to sweat when we brought it in)

Tom And Kristen’s Bar Stools

Posted in Uncategorized on November 30, 2017 by Chuck

I think it was like three years ago that Tom reached out to me to build him some stools. We chatted, traded pics… all the stuff that goes into designing something cool, right? But the stools remained ghosts…for three years. Then a couple months ago we started talking about the stools…again! But this time, the stools became real!

So a little backstory about this whole project. Tom and Kristen have this INSANE house here in Park City. Not insane like those idiotic, 10k s/f super mansions that no one lives in, insane like – super cool, 100 year old, old town, renovated sooooo perfectly, insane houses. This wasn’t just a “oh lets go to Poverty Barn and pick out some stools” kinda thing…hell no! This was a “Lets build some kick-ass bar stools that will be the perfect addition to this insane house!” kinda thing.

So we did.

Steel frames with 100 year old “Pickle-Wood” from pickle vats in PA, with custom leather backs sewn up by none other than Diamond Jim Davis himself! And oh, did I mention that theres TWELVE OF THEM!?

How friggin cool….

Awesome-Dave’s Table and Benches

Posted in Uncategorized on November 30, 2017 by Chuck

Hammered these out for a close friend of mine whose been asking me to build him a table for quite some time. ┬áDaves a pretty cool guy… mountain biker, fisherman, whiskey drinker… a man’s man, if you will. So he wasn’t having anything too terribly fancy, but he still wanted it to be rad, and it had to be functional.

He sent me a few pics of some stuff he saw that he liked but as with any two guys, discussing furniture design always took a backset to more important conversation topics…like mountain biking, fishing, and drinking whiskey!

But once Dave knew that I knew what he was after he pretty much just told me to run with it… and here’s the result.

A killer Maple top with Walnut legs and matching benches. Definitely at home in any “man’s” house!

Carrie’s coffee table and cubby shelf

Posted in Uncategorized on May 5, 2017 by Chuck

Delivered these pieces to Carrie today. She and her husband own a great condo at Deer Valley here in PC however the furniture that it came with was a little on the bulky side.

This awesome piece had walnut legs and a beechwood top and bottom shelf. Somewhat hidden is the custom steel truss that I welded up that penetrates each leg and also supports the bottom shelf. It took quite a bit of time to mortise the rectangle holes in the legs and I have to be honest, I even kinda surprised myself with how perfect they turned out!

Also included with the coffee table is this great little cubby shelf I made. Reclaimed sides and dividers with pine shelves and random parquet backing. The hooks are 1-1/4″ steel that I custom bent for this project. I think it turned out great!

fullsizeoutput_1305

fullsizeoutput_1304

Berlin Conference Table

Posted in Uncategorized on April 14, 2017 by Chuck

Delivered this beauty today to a local company here in Park City. They contacted me with a need for a hip new conference table to go into their new office space, but with a twist.

The company specializes in small startups that get funded by generous investors in and around PC. One question they had for me was if Id be interested in showcasing a table in return for some great exposure to new clients. While I normally have all the work I can handle, I figured it couldn’t hurt…right?

They also needed to keep the cost in check as well so we decided to use pine for the top and some reclaimed gas pipe for the legs. I welded some radius’d end caps on which I thought added a cool twist to things, and also left the random spray paint that was already on the pipe when I found it.

I masked the edges and painted them white for contrast which really makes this thing pop! The spray paint and white edge reminded me of the pieces/sections of the Berlin wall that Ive seen in museums around the world…hence the name.

Whatever its name though, I think it turned out pretty rad!